Barco MDNC-2221 Guide de l'utilisateur télécharger pdf (Page 26)

5. Advanced operation

5.12 Display orientation

About Display orientation

Your display automatically detects its physical orientation (portrait or landscape) and, by default, automat-

ically adjusts the image orientation to this. This means that when your display is physically rotated, the

image will rotate along.

The OSD menu however, allows to overrule this behavior and force the image orientation to portrait or

landscape regardless of the physical orientation of the display. This may be especially useful when oper-

ating your display with the screen facing upwards.

To set the Display orientation

1. Bring up the OSD main menu.

2. Navigate to the Conﬁguration > Image Sources menu.

3. Enter the Display Orientation submenu.

4. Select Landscape/Portrait/Automatic as desired and conﬁrm.

5.13 Video inp ut signals

About input signals

The available input signals for your display are:

DisplayPort 1 The input corresponding to the DisplayPort

connector.

DVI 1 The input corresponding to the DVI connector.

Automatic Selection

The input is automatically selected.

To manually select a video input signal:

1. Bring up the OSD main menu.

2. Navigate to the Conﬁguration > Image Source menu.

3. Enter the Input Signal submenu.

4. Select one of the available input signals and conﬁrm.

5.14 EDID timings

About EDID t imings

Following EDID timings are available for your NIO 2MP LED Display:

Refresh Rate Allows to manually select the refresh rate of the

image source video input signal depending on the

maximum refre sh rate of the display controller

connected to your display.

Preferred Orientation Allows to change the orientation of the image

source video input signal to landscape, portrait or

to let the display automatically assign the correct

orientation.

Color Depth Allows to change the color depth to 8 or to 10 bit.

24 K5903058 NIO 2MP LED DISPLAY 17/07/2014

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 43 44

Pas de commentaire

Barco MDNC-2221 Guide de l'utilisateur Page 26