Barco MDNC-2221 Guide de l'utilisateur télécharger pdf (Page 11)

3. Display installation

3. DISPLAY INSTALLATION

Prior to installing your NIO 2MP LED Display and connecting all necessary cables, make

sure to have a suitable display controller physically installed in your computer. If you

are using a Barco display controller, please consult the user guide delivered with it to

do this.

3.1 Unlockin g the heigh t mechani s m

To remove the clip:

1. Position the display with its rear side facing you.

2. Pull the red clip out of the ﬁxation hole in the foot.

3. Keep the clip in the dedicated hole in case the display needs to be shipped later.

3.2 Adjusting th e disp lay po sition

To adjust the display position

1. Stand at the front side of the panel and take the panel at both sides.

2. Very important: Tilt the panel upwards before c

hanging the orientation.

3. To change from portrait to landscape, turn the panel counterclockwise.

4. To change from landscape to portrait, turn clockwise.

K5903058 NIO 2MP LED DISPLAY 17/07/2014

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Pas de commentaire

Barco MDNC-2221 Guide de l'utilisateur Page 11