Barco Coronis Fusion Guide de l'utilisateur télécharger pdf (Page 34)

34 Coronis Fusion 6MP

Hibernate

ABOUT HIBERNATE

Enabling hibernation will not only switch off the backlight but will also

force the display to disable other functionalities so that power

consumption is further reduced to a minimum. This happens after a

specific period of time which can be manually adjusted.

TO ENABLE/DISABLE HIBERNATION ON YOUR DISPLAY:

1 Bring up the OSD main menu.

2 Navigate to the Configuration > Power Management menu.

3 Enter the Hibernate submenu.

4 Select Enabled/Disabled as desired and confirm.

TO SPECIFY THE HIBERNATE TIMEOUT:

1 Bring up the OSD main menu.

2 Navigate to the Configuration > Power Management menu.

3 Enter the Hibernate Timeout submenu.

4 Set the timeout value as desired and confirm.

Hibernate can only be enabled on your display when the DPMS

mode is enabled first. Therefore, please refer to “DPMS

mode” on page 33 to do this.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 83 84

Pas de commentaire

Barco Coronis Fusion Guide de l'utilisateur Page 34