Barco Coronis Fusion Guide de l'utilisateur télécharger pdf (Page 17)

Coronis Fusion 6MP 17

Re-attaching the covers

1 Re-attach the display stand cover by sliding it downward. You’ll

hear a “click” sound of the cover’s clips when the display stand

cover is in position.

2 Re-attach the connector compartment cover by sliding the cover’s

top in position and then push the cover’s bottom. You’ll hear a

“click” sound of the cover’s clips when the connector compartment

cover is in position.

VESA-mount installation

The panel, standard attached to a stand, is compatible with the VESA

100 mm standard. Thus, it can be used with an arm that is approved by

VESA. This chapter shows you how to release the panel from the stand

and how to attach it to an arm. If you’re not using an arm, you can skip

this chapter.

Pay attention that all cables stay in the cable channel

while replacing the cover.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 83 84

Pas de commentaire

Barco Coronis Fusion Guide de l'utilisateur Page 17