Barco Coronis Fusion Guide de l'utilisateur télécharger pdf (Page 31)

Coronis Fusion 6MP 31

Keys sound

ABOUT THE KEYS SOUND

By default, the keys will make a “beep” sound on every touch. However,

this sound can be disabled so that no sound will be heard when using

the keys.

TO ENABLE/DISABLE THE KEYS SOUND:

1 Bring up the OSD main menu.

2 Navigate to the Configuration > User Interface > Controls menu.

3 Enter the Sound submenu.

4 Select Enabled/Disabled as desired and confirm.

Ethernet over USB

ABOUT ETH. OVER USB

By default, the Ethernet over USB will be disabled. This does not disable

the USB hub and still allows to make use of the display’s USB

downstream connectors and any external devices connected to it

(keyboard, mouse, ...).

Please note that a connection from a PC USB downstream connector to

the display’s USB upstream connector is required to be able to use this

functionality.

By enabling the Ethernet over USB, you allow the internal C

ORONIS FUSION

6MP display processor to communicate directly over USB with the

connected PC.

Enabling the USB endpoint is only recommended when you are

using a non-Barco display controller. If you are using a Barco

display controller, this communication will automatically be

done over the connected video cable(s).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 83 84

Pas de commentaire

Barco Coronis Fusion Guide de l'utilisateur Page 31