Barco MatrixPRO Manuel d'instructions télécharger pdf (Page 53)

MatrixPRO • 16x16 and 8x8 HD/SD-SDI Router • User’s Guide 43

4. GUI Installation and Operation

GUI Operation

 Use the following steps to perform a sample sequence:

1. Two presets were configured and loaded earlier in this tutorial. Refer to the

“Preset Save And Recall” section for details.

2. Be sure that the two "On" boxes for sequences 1 and 2 are checked.

3. Set the delay for 3 seconds duration for each sequence.

4. Click the Start key.

5. Click the Video Switching Tab and watch the input assignments change every 3

seconds. Look at the front panel, and note that the input assignment for output

channel 1 is showing the same activity.

6. Click the Sequence Tab and stop the sequence.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 89 90

Pas de commentaire

Barco MatrixPRO Manuel d'instructions Page 53