Barco DC Toolset Guide de l'utilisateur télécharger pdf (Page 97)

10. ViewScape Configuration

10.2.4.2 Test pattern set up

How to configure a test pattern

1. Click on of the 6 available patterns.

The name of the selected pattern will be displayed in the box Current pattern. (image 10-14)

Depending on the selected pattern, an extra input box appears.

Pattern Extra input box

Bytelevel

Amplitude: the amplitude (brightness) of the pattern.

Crosshatch Pixelwidth: the width of the pixels (lines). Value between 1 and 4.

HRamp no extra input box

Multiburst

Type: type of the multiburst pattern (width of the pixels). Can be a value between

0 and 7.

Blocks no extra input box

VRamp no extra input box

2. Select the color that will be used to generate the pattern.

The following options are possible:

-Red

-Green

-Blue

- Yellow(R+G)

-Cyan(G+B)

- Magenta (R + B)

- White(R+G+B)

- Loop all

Select ‘LOOP ALL’ to loop through all the available colors.

3. If the pattern has to move over the screen, check Vertical and/or horizontal and select the direction.

Note: Only available for ’Crosshatch’, ’HRamp’ and ’VRamp’ patterns.

Note: Important to avoid a burn in.

Image 10-14

Pattern choices

R5976476 VIEWSCAPE TOOLSET 01/07/2004 93

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 132 133

Pas de commentaire

Barco DC Toolset Guide de l'utilisateur Page 97