Barco Coronis 3MP Guide de l'utilisateur télécharger pdf (Page 15)

3. Display installation

1. Connect the DVI or DP of the display controller to the DVI or DP connector of the display.

2. If you want to make use of the display’s USB upstream connector, connect a PC USB downstream

connector to the display’s USB upstream connector.

3. If you have chosen to use the display’s USB downstream connector, connect a USB device to the

downstream connector.

4. Connect the supplied external DC power supply to the +24 Vdc power input of the display.

5. Plug the mains connector of the external DC power supply to a grounded power outlet by means of

one of the supplied power cables.

K5902060 CORONIS 3MP LED DISPLAY 10/04/2013 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Pas de commentaire

Barco Coronis 3MP Guide de l'utilisateur Page 15