Barco DVI16x16 Guide de l'utilisateur télécharger pdf (Page 42)

MatrixPRO-II DVI 16x16 Router

________________________________________________________________________

User’s Guide Rev. 04

3. Connect the Service Port located on the rear panel of the MATRIXPRO-II DVI 16x

16 to a RS-232(Comm port) on a PC using the supplied download cable (RJ11

to D-Sub 9Pin cable).

4. Select ②, ‘Comm port’ to select communication port of PC for RS-232

communication with MATRIXPRO-II DVI 16x16.

5. To enable Comm port, Click ③ when it is shown as ‘Serial Port Enable’.

6. Power-On the MATRIXPRO-II DVI 16x16.

7. The firmware upload should then begin and the status will be shown in the message

①

①①

①

②

②②

②

③

③③

③

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Barco DVI16x16 Guide de l'utilisateur Page 42