Barco RLM W6 Guide de l'utilisateur télécharger pdf (Page 51)

51

Cleaning the lter

In order to keep the interior of the projector

clean, the projector is equipped with a filter to

keep out dust and other small particles. It is

recommended that you clean the projector's

filter around 500 hours of projector operation.

If you are operating the projector in a dusty

environment, it is recommended that you

clean the filter more often.

Dust clogs at the filter will prevent the

projector from drawing cool air to lower

the internal temperature. This could lead

to overheating and cause the projector to

malfunction or become damaged.

Use a vacuum cleaner to clean the

ventilation slots.

To clean the filter at the ventilation slots,

refer to the following illustration:

1. Loosen the two screws on the cover

of the ventilation slot.

Loosen the

2 screws

2. Remove the dirty lter; you can clean

it directly using water. Leave it to dry

before replacing it for further use. If

the lter is broken, purchase a new

one to replace it.

Take out the filter

and clean it.

3. Insert the clean lter.

Put the clear filter

inside the cover

4. Reattach the lter cover and tighten

the two screws.

Close the filter cover

then fasten

the 2 screws

Lamp and lter maintenance

7

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57

Commentaires sur ces manuels

Pas de commentaire